Skip to content

Atlanta Terminal Frequencies in Georgia

Radio frequencies for Atlanta Terminal in Georgia: 2 channels on 2 distinct frequencies. All are analog FM.

About Atlanta Terminal frequencies in Georgia

Quick answer: Yard channels: 160.3650, 160.7400 MHz.

  • Channel mix: 2 yard & switching.
  • 1 of the 2 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
  • 1 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.

Data updated .

Radio Frequencies for Atlanta Terminal in Georgia

Yard & switching (2)

Yard & switching frequencies for Atlanta Terminal in Georgia
Location / useFrequency (MHz)ToneModeFCC
Yard Operations160.3650
In 161.2950
131 DPLFMNKTG215
Operations160.7400CSQFMN

Frequently asked questions

What frequencies does Atlanta Terminal use in Georgia?

Atlanta Terminal has 2 channels listed in Georgia. The first ones are 160.3650, 160.7400 MHz. The full list is in the table on this page.

What are the yard frequencies for Atlanta Terminal in Georgia?

Yard and switching channels: 160.3650, 160.7400 MHz. Each yard uses its own channel; the location is shown in the table.

Do I need a tone to hear Atlanta Terminal in Georgia?

Most channels (1 of 2) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.