About Birmingham Terminal Railway (BHRR) Watco frequencies in Alabama
Quick answer: Yard channels: 160.2900, 160.3350, 160.4250 MHz and 10 more.
- Channel mix: 13 yard & switching.
- 13 of the 13 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
Data updated .
Radio Frequencies for Birmingham Terminal Railway (BHRR) Watco in Alabama
Yard & switching (13)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Yard Master | 160.2900 | CSQ | FMN | |
| Coal Job (runs to Concord Mines) | 160.3350 | CSQ | FMN | |
| Backup & Unused (Ch 9) | 160.4250 | CSQ | FMN | |
| Backup & Unused (Ch 11) | 160.4250 | CSQ | FMN | |
| Backup & Unused (Ch 8) | 160.5150 | CSQ | FMN | |
| Backup & Unused (Ch 10) | 160.5150 | CSQ | FMN | |
| Backup & Unused (Ch 15) | 160.5600 | CSQ | FMN | |
| Backup & Unused (Ch 1) | 160.5750 | CSQ | FMN | |
| Port Job (runs to Birmingham Port) | 160.6050 | CSQ | FMN | |
| Backup & Unused (Ch 12) | 160.8150 | CSQ | FMN | |
| Pipe Job (switches US Steel Pipemill) | 161.0250 | CSQ | FMN | |
| General Job | 161.3850 | CSQ | FMN | |
| Yard Job | 161.4450 | CSQ | FMN |
Frequently asked questions
What frequencies does Birmingham Terminal Railway (BHRR) Watco use in Alabama?
Birmingham Terminal Railway (BHRR) Watco has 13 channels listed in Alabama. The first ones are 160.2900, 160.3350, 160.4250, 160.5150 MHz. The full list is in the table on this page.
What are the yard frequencies for Birmingham Terminal Railway (BHRR) Watco in Alabama?
Yard and switching channels: 160.2900, 160.3350, 160.4250, 160.5150, 160.5600, 160.5750 MHz. Each yard uses its own channel; the location is shown in the table.
Do I need a tone to hear Birmingham Terminal Railway (BHRR) Watco in Alabama?
Most channels (13 of 13) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.