Skip to content

Metra Frequencies in Illinois

Radio frequencies for Metra in Illinois: 15 channels on 15 distinct frequencies. 1 channel is digital (NXDN, DMR or P25).

About Metra frequencies in Illinois

Quick answer: Railroad police channels: 160.6050, 160.6350, 161.6100 MHz and 1 more.

  • Channel mix: 4 railroad police, 11 operations.
  • 10 of the 15 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
  • 3 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.
  • 2 channels name their AAR channel number in the listing.

Data updated .

Radio Frequencies for Metra in Illinois

Railroad police (4)

Railroad police frequencies for Metra in Illinois
Location / useFrequency (MHz)ToneModeFCC
Police160.6050
Also WI
146.2 PLFMNWNBG753
Police160.6350FMNWNBG753
Police161.6100CSQFMNKFW518
Police: Mobile Extenders453.487577.0 PLFMNWPTW445

Operations (11)

Operations frequencies for Metra in Illinois
Location / useFrequency (MHz)ToneModeFCC
Ops (Chicago Union Station)150.8900
In 153.5150
NXDN48 DigitalWQXZ480
SW Service, Chicago to 21st St160.3050CSQFMNKNFX766
SW Service, 21st St to Manhattan160.4400CSQFMNWNQU573
Milwaukee District North160.7700CSQFMNKFW518
UP-North Ogilvie AAR 52
AAR channel 52
160.8900CSQFMN
Heritage Corridor160.9200CSQFMNKNFX766
Electric161.0250173.8 PLFMNWNMV660
UP-North Clybourn-Kenosha AAR 62
AAR channel 62
161.0400
Also WI
CSQFMN
Passenger Services161.2200CSQFMNWNBG753
Rock Island District161.3400CSQFMNKSB864
Milwaukee District West161.5200CSQFMNKFW519

Frequently asked questions

What frequencies does Metra use in Illinois?

Metra has 15 channels listed in Illinois. The first ones are 160.6050, 160.6350, 161.6100, 453.4875 MHz. The full list is in the table on this page.

Do I need a tone to hear Metra in Illinois?

Most channels (10 of 15) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

Does Metra use digital radio in Illinois?

1 of the listed channels use a digital mode (NXDN, DMR or P25). You need a scanner that decodes that mode to hear them.

Are these Metra frequencies also used in nearby states?

Yes. 2 of the frequencies are also listed for Metra in neighbouring states, which is normal near state lines.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.

See all Metra frequencies or all railroads in Illinois.