Skip to content

Missouri & Northern Arkansas Railroad Frequencies in Arkansas

Radio frequencies for Missouri & Northern Arkansas Railroad in Arkansas: 4 channels on 3 distinct frequencies. All are analog FM.

About Missouri & Northern Arkansas Railroad frequencies in Arkansas

Quick answer: Road channels: 160.6350 MHz. Yard channels: 160.5900 MHz.

  • Channel mix: 1 road / main line, 1 yard & switching, 2 operations.
  • 3 of the 4 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
  • 1 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.
  • 4 channels name their AAR channel number in the listing.

Data updated .

Radio Frequencies for Missouri & Northern Arkansas Railroad in Arkansas

Road / main line (1)

Road / main line frequencies for Missouri & Northern Arkansas Railroad in Arkansas
Location / useFrequency (MHz)ToneModeFCC
Road
AAR channel 35
160.6350CSQFMNWPBR411

Yard & switching (1)

Yard & switching frequencies for Missouri & Northern Arkansas Railroad in Arkansas
Location / useFrequency (MHz)ToneModeFCC
Yard Ops
AAR channel 32
160.5900CSQFMNWPBR412

Operations (2)

Operations frequencies for Missouri & Northern Arkansas Railroad in Arkansas
Location / useFrequency (MHz)ToneModeFCC
General Operations
AAR channel 22
160.4400CSQFMNWQDY711
Pyatt
AAR channel 35
160.6350118.8 PLFMNWPBR412

Frequently asked questions

What frequencies does Missouri & Northern Arkansas Railroad use in Arkansas?

Missouri & Northern Arkansas Railroad has 4 channels listed in Arkansas. The first ones are 160.6350, 160.5900, 160.4400 MHz. The full list is in the table on this page.

What are the road channels for Missouri & Northern Arkansas Railroad in Arkansas?

Road (main line) channels: 160.6350 MHz. Road channels are used by crews on the main line and by the dispatcher.

What are the yard frequencies for Missouri & Northern Arkansas Railroad in Arkansas?

Yard and switching channels: 160.5900 MHz. Each yard uses its own channel; the location is shown in the table.

Do I need a tone to hear Missouri & Northern Arkansas Railroad in Arkansas?

Most channels (3 of 4) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.