About Vermont Railway System frequencies in Vermont
Quick answer: Dispatch channels: 160.2900, 161.1850, 161.1900 MHz. Yard channels: 160.7100, 161.3550 MHz. Maintenance-of-way channels: 160.6050 MHz.
- Channel mix: 2 yard & switching, 3 dispatch, 1 maintenance of way.
- 4 of the 6 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
- 2 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.
Data updated .
Radio Frequencies for Vermont Railway System in Vermont
Dispatch (3)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Rutland Dispatch (Killington) Operations | 160.2900 | 97.4 PL | FM | KES800 |
| Rutland Dispatch Operations | 161.1850 | CSQ | FM | KES800 |
| Rutland Dispatch (Okemo-Charlotte-N Bennington) Operations | 161.1900 | 97.4 PL | FM | KES800 |
Yard & switching (2)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Yard operations | 160.7100 | CSQ | FM | |
| Yard operations | 161.3550 | CSQ | FM |
Maintenance of way (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Maintenance of Way and Equipment Operations | 160.6050 | CSQ | FM |
Frequently asked questions
What frequencies does Vermont Railway System use in Vermont?
Vermont Railway System has 6 channels listed in Vermont. The first ones are 160.2900, 161.1850, 161.1900, 160.7100 MHz. The full list is in the table on this page.
What are the yard frequencies for Vermont Railway System in Vermont?
Yard and switching channels: 160.7100, 161.3550 MHz. Each yard uses its own channel; the location is shown in the table.
What is the dispatch frequency for Vermont Railway System in Vermont?
Dispatch channels: 160.2900, 161.1850, 161.1900 MHz.
Do I need a tone to hear Vermont Railway System in Vermont?
Most channels (4 of 6) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.