Skip to content

Alameda Corridor Transportation Authority Frequencies in California

Radio frequencies for Alameda Corridor Transportation Authority in California: 3 channels on 3 distinct frequencies. All are analog FM.

About Alameda Corridor Transportation Authority frequencies in California

Quick answer: Road channels: 160.3650, 160.9650 MHz. Yard channels: 160.9800 MHz.

  • Channel mix: 2 road / main line, 1 yard & switching.
  • 2 of the 3 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
  • 1 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.

Data updated .

Radio Frequencies for Alameda Corridor Transportation Authority in California

Road / main line (2)

Road / main line frequencies for Alameda Corridor Transportation Authority in California
Location / useFrequency (MHz)ToneModeFCC
Road - E Redondo to W Thenard
Operations
160.3650103.5 PLFMNWPRF565
Road
Operations
160.9650CSQFMNWPXD861

Yard & switching (1)

Yard & switching frequencies for Alameda Corridor Transportation Authority in California
Location / useFrequency (MHz)ToneModeFCC
Yard - Wilmington Port
Operations
160.9800CSQFMNWPXD861

Frequently asked questions

What frequencies does Alameda Corridor Transportation Authority use in California?

Alameda Corridor Transportation Authority has 3 channels listed in California. The first ones are 160.3650, 160.9650, 160.9800 MHz. The full list is in the table on this page.

What are the road channels for Alameda Corridor Transportation Authority in California?

Road (main line) channels: 160.3650, 160.9650 MHz. Road channels are used by crews on the main line and by the dispatcher.

What are the yard frequencies for Alameda Corridor Transportation Authority in California?

Yard and switching channels: 160.9800 MHz. Each yard uses its own channel; the location is shown in the table.

Do I need a tone to hear Alameda Corridor Transportation Authority in California?

Most channels (2 of 3) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.