About Amtrak frequencies in California
Quick answer: Road channels: 160.5450, 160.6500, 160.8150 MHz. Yard channels: 160.4550, 452.9000 MHz. Railroad police channels: 161.0550 MHz.
- Channel mix: 3 road / main line, 2 yard & switching, 1 railroad police, 1 operations.
- 5 of the 7 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
- 2 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.
Data updated .
Radio Frequencies for Amtrak in California
Road / main line (3)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Road - CP Taylor to CP Las Posas Los Angeles Area | 160.5450 Also CT, IL, WI | CSQ | FMN | |
| Road - Fullerton JUNCTION to CP Soto Los Angeles Area | 160.6500 Also MD, NY, PA | CSQ | FMN | |
| Road - CP Soto to CP Taylor and LA Union Station Los Angeles Area | 160.8150 Also in 5 other states | CSQ | FMN |
Yard & switching (2)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Yard - Los Angeles 8th Street Los Angeles Area | 160.4550 Also CT, MA, NY, PA | CSQ | FMN | |
| Union Station / 8th Street Mechanical Yard Ops Los Angeles Area | 452.9000 In 457.9000 Also IN | 266 DPL | FMN | WNKW776 |
Railroad police (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Police - Los Angeles and San Diego areas Los Angeles Area | 161.0550 In 161.4750 | 146.2 PL | FMN | KNBC970 |
Operations (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Santa Barbara Los Angeles Area | 161.5500 Also CO, FL, MA | CSQ | FMN |
Frequently asked questions
What frequencies does Amtrak use in California?
Amtrak has 7 channels listed in California. The first ones are 160.5450, 160.6500, 160.8150, 160.4550 MHz. The full list is in the table on this page.
What are the road channels for Amtrak in California?
Road (main line) channels: 160.5450, 160.6500, 160.8150 MHz. Road channels are used by crews on the main line and by the dispatcher.
What are the yard frequencies for Amtrak in California?
Yard and switching channels: 160.4550, 452.9000 MHz. Each yard uses its own channel; the location is shown in the table.
Do I need a tone to hear Amtrak in California?
Most channels (5 of 7) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
Are these Amtrak frequencies also used in nearby states?
Yes. 6 of the frequencies are also listed for Amtrak in neighbouring states, which is normal near state lines.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.