About Amtrak frequencies in Florida
Quick answer: Road channels: 160.3650, 161.2950 MHz. Yard channels: 161.5500 MHz.
- Channel mix: 2 road / main line, 1 yard & switching, 3 operations.
- 4 of the 6 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
- 1 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.
Data updated .
Radio Frequencies for Amtrak in Florida
Road / main line (2)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Road AutoTrain Operations | 160.3650 Also in 5 other states | CSQ | FMN | WPTX579 |
| Road AutoTrain Operations | 161.2950 Also in 10 other states | CSQ | FMN | WPTX579 |
Yard & switching (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Switching AutoTrain Operations | 161.5500 Also CA, CO, MA | CSQ | FMN |
Operations (3)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Operations AutoTrain Operations | 160.8450 Also LA, VA | CSQ | FMN | WPTX579 |
| Maintenance Facility (Sanford) AutoTrain Operations | 173.2250 In 160.4100 Also IL, VA | 79.7 PL | FMN | WPBR415 |
| Station operations - public side AutoTrain Operations | 467.8750 | FMN |
Frequently asked questions
What frequencies does Amtrak use in Florida?
Amtrak has 6 channels listed in Florida. The first ones are 160.3650, 161.2950, 161.5500, 160.8450 MHz. The full list is in the table on this page.
What are the road channels for Amtrak in Florida?
Road (main line) channels: 160.3650, 161.2950 MHz. Road channels are used by crews on the main line and by the dispatcher.
What are the yard frequencies for Amtrak in Florida?
Yard and switching channels: 161.5500 MHz. Each yard uses its own channel; the location is shown in the table.
Do I need a tone to hear Amtrak in Florida?
Most channels (4 of 6) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
Are these Amtrak frequencies also used in nearby states?
Yes. 5 of the frequencies are also listed for Amtrak in neighbouring states, which is normal near state lines.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.