About Amtrak frequencies in Maryland
Quick answer: Road channels: 160.6350, 160.8000, 160.9200 MHz and 2 more. Maintenance-of-way channels: 160.3650, 160.5150, 160.6500 MHz. Railroad police channels: 161.2050, 161.2950, 173.3750 MHz and 4 more.
- Channel mix: 5 road / main line, 3 maintenance of way, 7 railroad police.
- 3 of the 15 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
- 9 channels use a PL or DPL tone; enter it on your scanner or you may hear nothing.
Data updated .
Radio Frequencies for Amtrak in Maryland
Road / main line (5)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Road - Harrisburg | 160.6350 Also PA | CSQ | FM | |
| Road 1 | 160.8000 Also MI | FM | ||
| Road - Northeast Corridor | 160.9200 In 161.1150 Also in 7 other states | CSQ | FM | |
| Road 2 | 161.0700 | FM | ||
| Road 3 | 161.1150 | CSQ | FM |
Maintenance of way (3)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Maintenance of Way 2 | 160.3650 Also in 5 other states | FM | KIL701 | |
| Maintenance of Way 1 | 160.5150 In 161.1150 Also DE, NJ, NY, PA | 146.2 PL | FM | |
| Communications and Signal Department | 160.6500 Also CA, NY, PA | 146.2 PL | FM |
Railroad police (7)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Police Car-to-Car | 161.2050 Also in 5 other states | 146.2 PL | FM | |
| Police Baltimore (Ch. 1) | 161.2950 Also in 10 other states | 156.7 PL | FM | |
| Police Chase | 161.2950 Also in 10 other states | 94.8 PL | FM | |
| Police Perryville | 161.2950 Also in 10 other states | 100.0 PL | FM | |
| Police Severn | 161.2950 Also in 10 other states | 131.8 PL | FM | |
| Police CID | 173.3750 Also DE, NJ, PA, VA | 146.2 PL | FM | |
| Police PTL | 173.3750 Also DE, NJ, PA, VA | 203.5 PL | FM |
Frequently asked questions
What frequencies does Amtrak use in Maryland?
Amtrak has 15 channels listed in Maryland. The first ones are 160.6350, 160.8000, 160.9200, 161.0700 MHz. The full list is in the table on this page.
What are the road channels for Amtrak in Maryland?
Road (main line) channels: 160.6350, 160.8000, 160.9200, 161.0700, 161.1150 MHz. Road channels are used by crews on the main line and by the dispatcher.
Do I need a tone to hear Amtrak in Maryland?
Most channels (3 of 15) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
Are these Amtrak frequencies also used in nearby states?
Yes. 9 of the frequencies are also listed for Amtrak in neighbouring states, which is normal near state lines.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.