Skip to content

Seminole Gulf Railway Frequencies in Florida

Radio frequencies for Seminole Gulf Railway in Florida: 3 channels on 3 distinct frequencies. All are analog FM.

About Seminole Gulf Railway frequencies in Florida

Quick answer: Road channels: 160.7100 MHz. Yard channels: 161.2350 MHz. Maintenance-of-way channels: 160.2750 MHz.

  • Channel mix: 1 road / main line, 1 yard & switching, 1 maintenance of way.
  • 3 of the 3 channels use carrier squelch (CSQ), so no tone is needed on your scanner.

Data updated .

Radio Frequencies for Seminole Gulf Railway in Florida

Road / main line (1)

Road / main line frequencies for Seminole Gulf Railway in Florida
Location / useFrequency (MHz)ToneModeFCC
Road
Fort Myers and Sarasota Divisions
160.7100
In 161.5500
CSQFMN

Yard & switching (1)

Yard & switching frequencies for Seminole Gulf Railway in Florida
Location / useFrequency (MHz)ToneModeFCC
Yard
Fort Myers and Sarasota Divisions
161.2350CSQFMN

Maintenance of way (1)

Maintenance of way frequencies for Seminole Gulf Railway in Florida
Location / useFrequency (MHz)ToneModeFCC
MOW
Fort Myers and Sarasota Divisions
160.2750CSQFMN

Frequently asked questions

What frequencies does Seminole Gulf Railway use in Florida?

Seminole Gulf Railway has 3 channels listed in Florida. The first ones are 160.7100, 161.2350, 160.2750 MHz. The full list is in the table on this page.

What are the road channels for Seminole Gulf Railway in Florida?

Road (main line) channels: 160.7100 MHz. Road channels are used by crews on the main line and by the dispatcher.

What are the yard frequencies for Seminole Gulf Railway in Florida?

Yard and switching channels: 161.2350 MHz. Each yard uses its own channel; the location is shown in the table.

Do I need a tone to hear Seminole Gulf Railway in Florida?

Most channels (3 of 3) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.