About George Town Railroad frequencies in Texas
Quick answer: Yard channels: 160.9950 MHz.
- Channel mix: 1 yard & switching, 1 operations.
- 2 of the 2 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
Data updated .
Radio Frequencies for George Town Railroad in Texas
Yard & switching (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Rock Loading, Switching around Round Rock Operations | 160.9950 | CSQ | FMN |
Operations (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Railroad Operations | 160.7400 | CSQ | FMN |
Frequently asked questions
What frequencies does George Town Railroad use in Texas?
George Town Railroad has 2 channels listed in Texas. The first ones are 160.9950, 160.7400 MHz. The full list is in the table on this page.
What are the yard frequencies for George Town Railroad in Texas?
Yard and switching channels: 160.9950 MHz. Each yard uses its own channel; the location is shown in the table.
Do I need a tone to hear George Town Railroad in Texas?
Most channels (2 of 2) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.