Skip to content

Northeast Texas Connector Frequencies in Texas

Radio frequencies for Northeast Texas Connector in Texas: 1 channel on 1 distinct frequency. All are analog FM.

About Northeast Texas Connector frequencies in Texas

  • Channel mix: 1 operations.
  • 1 of the 1 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
  • 1 channels name their AAR channel number in the listing.

Data updated .

Radio Frequencies for Northeast Texas Connector in Texas

Operations (1)

Operations frequencies for Northeast Texas Connector in Texas
Location / useFrequency (MHz)ToneModeFCC
Winfield TX to Greenville TX
Operations · AAR channel 62
161.0400CSQFMN

Frequently asked questions

What frequencies does Northeast Texas Connector use in Texas?

Northeast Texas Connector has 1 channel listed in Texas. The first ones are 161.0400 MHz. The full list is in the table on this page.

Do I need a tone to hear Northeast Texas Connector in Texas?

Most channels (1 of 1) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.