About Indiana Rail Road frequencies in Indiana
Quick answer: Dispatch channels: 160.6200 MHz. Yard channels: 160.2600, 161.5350 MHz. Maintenance-of-way channels: 161.0550 MHz.
- Channel mix: 2 yard & switching, 1 dispatch, 1 maintenance of way.
- 4 of the 4 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
- 4 channels name their AAR channel number in the listing.
Data updated .
Radio Frequencies for Indiana Rail Road in Indiana
Dispatch (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Dispatcher & Road Systemwide Road Operations · AAR channel 34 | 160.6200 Also IL | CSQ | FMN |
Yard & switching (2)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Yard Operations Hiawatha Yard · AAR channel 10 | 160.2600 Also IL | CSQ | FMN | |
| Yard Operations Hiawatha Yard · AAR channel 95 | 161.5350 Also IL | CSQ | FMN |
Maintenance of way (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Agency, Mechanical, MOW, and C&S Road Operations · AAR channel 63 | 161.0550 | CSQ | FMN |
Frequently asked questions
What frequencies does Indiana Rail Road use in Indiana?
Indiana Rail Road has 4 channels listed in Indiana. The first ones are 160.6200, 160.2600, 161.5350, 161.0550 MHz. The full list is in the table on this page.
What are the yard frequencies for Indiana Rail Road in Indiana?
Yard and switching channels: 160.2600, 161.5350 MHz. Each yard uses its own channel; the location is shown in the table.
What is the dispatch frequency for Indiana Rail Road in Indiana?
Dispatch channels: 160.6200 MHz.
Do I need a tone to hear Indiana Rail Road in Indiana?
Most channels (4 of 4) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
Are these Indiana Rail Road frequencies also used in nearby states?
Yes. 3 of the frequencies are also listed for Indiana Rail Road in neighbouring states, which is normal near state lines.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.
See all Indiana Rail Road frequencies or all railroads in Indiana.