About Middletown and New Jersey Railroad frequencies in New York
Quick answer: Dispatch channels: 160.4850 MHz.
- Channel mix: 1 dispatch, 2 operations.
- 1 of the 3 channels use carrier squelch (CSQ), so no tone is needed on your scanner.
Data updated .
Radio Frequencies for Middletown and New Jersey Railroad in New York
Dispatch (1)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Campbell Hall to Warwick (NYSW Dispatch) Hudson Secondary | 160.4850 | CSQ | FMN |
Operations (2)
| Location / use | Frequency (MHz) | Tone | Mode | FCC |
|---|---|---|---|---|
| Operations 1 | 160.3200 | FMN | WQJS827 | |
| Operations 2 (Hudson Secondary) | 160.6500 | FMN | WQJS827 |
Frequently asked questions
What frequencies does Middletown and New Jersey Railroad use in New York?
Middletown and New Jersey Railroad has 3 channels listed in New York. The first ones are 160.4850, 160.3200, 160.6500 MHz. The full list is in the table on this page.
What is the dispatch frequency for Middletown and New Jersey Railroad in New York?
Dispatch channels: 160.4850 MHz.
Do I need a tone to hear Middletown and New Jersey Railroad in New York?
Most channels (1 of 3) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.
What do these columns mean?
- Frequency (MHz)
- Set this on your scanner. “In” is the repeater input and is not needed to listen.
- Tone
- CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
- Mode
- FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
- FCC
- The FCC callsign the channel is licensed under. Many channels list none.
- AAR channel
- The standard railroad channel number, when the listing names one.