Skip to content

Vermont Railway Frequencies in New York

Radio frequencies for Vermont Railway in New York: 4 channels on 4 distinct frequencies. All are analog FM.

About Vermont Railway frequencies in New York

Quick answer: Dispatch channels: 160.2900, 161.1900 MHz. Yard channels: 160.7100 MHz. Maintenance-of-way channels: 160.6050 MHz.

  • Channel mix: 1 yard & switching, 2 dispatch, 1 maintenance of way.
  • 4 of the 4 channels use carrier squelch (CSQ), so no tone is needed on your scanner.

Data updated .

Radio Frequencies for Vermont Railway in New York

Dispatch (2)

Dispatch frequencies for Vermont Railway in New York
Location / useFrequency (MHz)ToneModeFCC
Rutland Dispatch
B and R Subdivision
160.2900CSQFMNKES800
Rutland Dispatch
B and R Subdivision
161.1900CSQFMNKES800

Yard & switching (1)

Yard & switching frequencies for Vermont Railway in New York
Location / useFrequency (MHz)ToneModeFCC
Yard Operations
B and R Subdivision
160.7100CSQFMN

Maintenance of way (1)

Maintenance of way frequencies for Vermont Railway in New York
Location / useFrequency (MHz)ToneModeFCC
Maintenance of Way
B and R Subdivision
160.6050CSQFMN

Frequently asked questions

What frequencies does Vermont Railway use in New York?

Vermont Railway has 4 channels listed in New York. The first ones are 160.2900, 161.1900, 160.7100, 160.6050 MHz. The full list is in the table on this page.

What are the yard frequencies for Vermont Railway in New York?

Yard and switching channels: 160.7100 MHz. Each yard uses its own channel; the location is shown in the table.

What is the dispatch frequency for Vermont Railway in New York?

Dispatch channels: 160.2900, 161.1900 MHz.

Do I need a tone to hear Vermont Railway in New York?

Most channels (4 of 4) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.