Skip to content

Port Terminal Railroad Association Frequencies in Texas

Radio frequencies for Port Terminal Railroad Association in Texas: 5 channels on 5 distinct frequencies. All are analog FM.

About Port Terminal Railroad Association frequencies in Texas

Quick answer: Yard channels: 161.1450 MHz.

  • Channel mix: 1 yard & switching, 4 operations.
  • 5 channels name their AAR channel number in the listing.

Data updated .

Radio Frequencies for Port Terminal Railroad Association in Texas

Yard & switching (1)

Yard & switching frequencies for Port Terminal Railroad Association in Texas
Location / useFrequency (MHz)ToneModeFCC
Channel 3/Intermodal Ramp
Operations · AAR channel 3
161.1450FMNKKR480

Operations (4)

Operations frequencies for Port Terminal Railroad Association in Texas
Location / useFrequency (MHz)ToneModeFCC
Channel 1
Operations · AAR channel 1
160.7100FMNKKR480
Channel 49
Operations · AAR channel 49
160.8450FMNWNPK842
Channel 64
Operations · AAR channel 64
161.0700FMNKKR480
Channel 2
Operations · AAR channel 2
161.2650FMNKKR480

Frequently asked questions

What frequencies does Port Terminal Railroad Association use in Texas?

Port Terminal Railroad Association has 5 channels listed in Texas. The first ones are 161.1450, 160.7100, 160.8450, 161.0700 MHz. The full list is in the table on this page.

What are the yard frequencies for Port Terminal Railroad Association in Texas?

Yard and switching channels: 161.1450 MHz. Each yard uses its own channel; the location is shown in the table.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.