Skip to content

Santa Cruz, Big Trees and Pacific Railway Frequencies in California

Radio frequencies for Santa Cruz, Big Trees and Pacific Railway in California: 5 channels on 5 distinct frequencies. All are analog FM.

About Santa Cruz, Big Trees and Pacific Railway frequencies in California

Quick answer: Dispatch channels: 160.7400 MHz. Yard channels: 160.3200, 160.7700, 161.5500 MHz.

  • Channel mix: 3 yard & switching, 1 dispatch, 1 operations.
  • 5 of the 5 channels use carrier squelch (CSQ), so no tone is needed on your scanner.

Data updated .

Radio Frequencies for Santa Cruz, Big Trees and Pacific Railway in California

Dispatch (1)

Dispatch frequencies for Santa Cruz, Big Trees and Pacific Railway in California
Location / useFrequency (MHz)ToneModeFCC
Union Pacific RR Dispatcher
Operations
160.7400CSQFMNWQFA891

Yard & switching (3)

Yard & switching frequencies for Santa Cruz, Big Trees and Pacific Railway in California
Location / useFrequency (MHz)ToneModeFCC
Watsonville Yard Ch 2 Switching
Operations
160.3200CSQFMNWQFA891
Pajaro to Watsonville Yard
Operations
160.7700CSQFMNWQFA891
Watsonville Yard Ch 1 Switching
Operations
161.5500CSQFMNWQFA891

Operations (1)

Operations frequencies for Santa Cruz, Big Trees and Pacific Railway in California
Location / useFrequency (MHz)ToneModeFCC
Felton to Santa Cruz Beach Boardwalk
Operations
160.9950CSQFMNWQFA891

Frequently asked questions

What frequencies does Santa Cruz, Big Trees and Pacific Railway use in California?

Santa Cruz, Big Trees and Pacific Railway has 5 channels listed in California. The first ones are 160.7400, 160.3200, 160.7700, 161.5500 MHz. The full list is in the table on this page.

What are the yard frequencies for Santa Cruz, Big Trees and Pacific Railway in California?

Yard and switching channels: 160.3200, 160.7700, 161.5500 MHz. Each yard uses its own channel; the location is shown in the table.

What is the dispatch frequency for Santa Cruz, Big Trees and Pacific Railway in California?

Dispatch channels: 160.7400 MHz.

Do I need a tone to hear Santa Cruz, Big Trees and Pacific Railway in California?

Most channels (5 of 5) use carrier squelch (CSQ), which needs no tone. Channels that list a PL or DPL tone need that tone set on the scanner.

What do these columns mean?

Frequency (MHz)
Set this on your scanner. “In” is the repeater input and is not needed to listen.
Tone
CSQ means carrier squelch (no tone needed). A PL or DPL value is a sub-audible tone to enter on your scanner.
Mode
FM and FMN are analog (FMN is narrowband). NXDN, DMR and P25 are digital and need a scanner that decodes them.
FCC
The FCC callsign the channel is licensed under. Many channels list none.
AAR channel
The standard railroad channel number, when the listing names one.