The short version
The Association of American Railroads (AAR) publishes a standard plan of numbered VHF radio channels so that railroads can talk to each other, and so that radios from different makers work on every railroad. Each channel number stands for one frequency.
Most of the frequencies you see on this site fall between about 160 MHz and 161.6 MHz. That is the VHF railroad band.
Using the channel number
When a listing includes an AAR channel, you can use the number to find the same channel on a radio that is programmed by number. The frequency in MHz is the part you type into a scanner.
Some listings show the number only in the alpha tag the scanner shows (for example “AAR 010”). Where the number is not given, use the frequency.
Why channels repeat
The same channel can be used by many railroads in different parts of the country, and by different yards of one railroad. The channel alone does not tell you who is talking. The railroad and state pages on this site show who uses it where.
Other bands
Railroads also use other radio bands:
- UHF channels around 450 to 470 MHz for yards, terminals and some digital systems.
- Data and telemetry channels for end-of-train and head-of-train devices.
- Digital channels (NXDN, DMR or P25) on some railroads. See the guide to digital railroad radio.
Frequently asked questions
Do I need a special scanner for AAR channels?
No. Any scanner that covers VHF high-band (about 136 to 174 MHz) can receive the standard channels. See which scanner you need.
What mode should I use?
Most channels are narrowband FM. Set the scanner to FM (or NFM if it has that setting). Digital channels need a scanner that decodes the mode.