Skip to content

Digital Railroad Radio: NXDN, DMR and P25 on the Railroad

Most railroad radio is still analog FM, but some railroads and terminals use digital modes such as NXDN, DMR or P25. You need a scanner that decodes the mode to hear them.

The short version

Analog FM is still the standard on the main VHF channels. Some railroads, terminals and transit operations use digital voice on certain channels. A digital channel sounds like harsh noise on an analog scanner.

On this site, a listing whose mode is NXDN, DMR or P25 carries a Digital badge.

What you need

  • A scanner that decodes the mode shown in the listing. Not every scanner decodes every mode.
  • The right code: a RAN for NXDN, a color code for DMR, or a NAC for P25.

Data channels are different

Some railroad frequencies carry data, not voice: end-of-train and head-of-train devices, distributed power units and similar equipment. You can hear them as short bursts of tone, but they cannot be turned into speech.

Frequently asked questions

Can I listen to an NXDN or DMR channel?

Only with a scanner that decodes it. Check your scanner's specifications before you buy.