Skip to content

CSQ, PL and DPL: What the Tone Column Means on Railroad Frequencies

CSQ means carrier squelch: no tone is needed. PL and DPL are quiet tones sent under the voice. You can leave them off your scanner to hear everything on the frequency.

The short version

You seeNameWhat it is
CSQCarrier squelchNo code. The receiver opens whenever there is a signal.
131.8 PLCTCSS / PLA continuous sub-audible tone, in hertz.
074 DPLDCS / DPLA sub-audible digital code, three digits.
1 RANRANA number on NXDN digital channels.
NAC 293NACA code on P25 digital channels.

A tone is not a password and does not scramble anything. It tells a radio “this transmission is for you”.

What to enter in your scanner

  • CSQ: leave the tone off.
  • PL or DPL: enter the tone to hear only that channel, or leave it off to hear everything on the frequency, including other users.
  • Digital codes: most scanners can leave the code off or set it to “any”.

Most railroad channels are CSQ, so most of the time there is nothing to enter.

Frequently asked questions

Why do I hear nothing on a channel that lists a tone?

If you set the wrong tone, the scanner stays silent. Try leaving the tone off.