Skip to content

Which Scanner Do I Need for Railroad Radio?

Any scanner that covers the VHF high band (about 136 to 174 MHz) and narrowband FM can receive most railroad channels. A digital decoder is needed only for NXDN, DMR or P25 channels.

The short version

For most railroad listening you need three things:

  1. VHF high-band coverage, roughly 136 to 174 MHz, for the AAR channels near 160 to 161.6 MHz.
  2. Narrowband FM (often shown as FM or NFM).
  3. Enough memory to hold the channels for your area. A few dozen channels are enough for most people.

Optional

  • UHF coverage (around 450 to 470 MHz) if you want yard and terminal channels in that band.
  • Digital decoding for NXDN, DMR or P25, if a channel you want is digital.
  • Tone squelch (PL/DPL) support, so you can use a listed tone. Leaving the tone off also works.

Frequently asked questions

Do I need a trunking scanner for railroads?

Almost never. Railroad radio is mostly conventional, with one frequency per channel.

Can I use a handheld?

Yes. A handheld with VHF coverage works well near the tracks. A base or mobile antenna helps at a distance.